WarpConduit Computing

  • Quick Tips
  • Web Design & Development
  • Graphic Design
  • Home
  • WordPress Plugins
  • Password Generator
  • About
  • Contact

Installing Metadot on Ubuntu Server 9.04

October 27, 2009 by Josh Hartman

Installing Ubuntu 9.04 on Virtual PC

Note: If not installing to Virtual PC, ignore any steps that have to do with GRUB, menu.lst and modifying the boot command line.

1. Boot to installation CD

2. Choose a language (English)

3. Press F6 and then ESC

4. Add “vga=791 noreplace-paravirt” before “quiet” in the boot command line and press ENTER

5. Choose a language (English)

6. Choose a country (United States)

7. Detect keyboard layout (No)

8. Origin of keyboard (USA)

9. Keyboard layout (USA)

10. Choose hostname (metadot6)

11. Choose time zone (Central)

12. Choose partition method (Guided – use entire disk and setup LVM)

13. Choose hard drive to partition (SCSI1 (0,0,0) – (sda))

14. Write the changes to disk and setup LVM (Yes)

15. Choose amount of volume group to use for guided partitioning (max)

16. Write the changes to disk (Yes)

17. Enter Full Name for new account

18. Enter Username for account

19. Enter Password for account

20. Encrypt your home directory (No)

21. Choose proxy (leave blank)

22. Choose upgrade management (Install security updates automatically)

23. Choose software to install (LAMP, OpenSSH, Samba)

24. Enter MYSQL root password

25. Installation is complete, continue to reboot automatically. IMPORTANT: Read next three steps before continuing

26. During boot, when GRUB menu shows, press ESC, E, and E again to edit the boot line

27. Add “vga=791 noreplace-paravirt” before “quiet” in the boot command line

28. Press ENTER and B to boot

29. Login with your admin account

30. Run: sudo nano /boot/grub/menu.lst

31. Find normal kernel boot command line in bottom part of file and add “vga=791 noreplace-paravirt” before “quiet”

32. Ctrl+O, ENTER and Ctrl+X to save and exit

33. Run: sudo reboot

 

Configure a Static IPv4 Network Address

1. Login with your admin account

2. Run: sudo nano /etc/network/interfaces

3. Remove the “iface eth0 inet dhcp” configuration line under the “# The primary network interface” section

4. Replace with the following:

iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1

iface eth0 inet static address 192.168.1.10 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1

5. Ctrl+O, ENTER and Ctrl+X to save and exit

6. Run: sudo /etc/init.d/networking restart

7. Test pinging 192.168.1.10 from another PC

 

Install Latest Ubuntu Updates

1. Login with your admin account

2. Run: sudo apt-get update

3. Run: sudo apt-get upgrade

4. Run: sudo apt-get dist-upgrade

5. What to do with menu.lst (keep the local version)

6. Run: sudo reboot

 

Configure MySQL Server

1. Login with your admin account

2. Run: sudo nano /etc/mysql/my.cnf

3. Comment out the lines “skip-external-locking” and “bind-address = 127.0.0.1”

4. Ctrl+O and Ctrl+X to save and exit

5. Run: mysql -uroot -p mysql

6. Enter MySQL password

7. Run the following SQL commands:

update user set Host='%' where Host='127.0.0.1' and User='root';
FLUSH PRIVILEGES;
quit

update user set Host='%' where Host='127.0.0.1' and User='root'; FLUSH PRIVILEGES; quit

8. Run: sudo /etc/init.d/mysql restart

9. Test connecting with HeidiSQL

 

Install Metadot6

1. Connect to the server with an SSH client and then login with your admin account

2. Run: sudo apt-get clean

3. Run: sudo apt-get install libapache2-mod-speedycgi speedy-cgi-perl libwww-perl libdbi-perl libapache2-mod-perl2 libapache-dbi-perl libxml-rss-perl libnet-ldap-perl liblog-agent-perl libmail-pop3client-perl libio-stringy-perl libmailtools-perl libmime-tools-perl libunicode-string-perl libspreadsheet-writeexcel-perl libdate-calc-perl libappconfig-perl libimage-size-perl libtemplate-perl liblingua-en-nameparse-perl libnumber-format-perl libxml-simple-perl libtext-csv-xs-perl libarchive-zip-perl libdate-manip-perl libxml-dumper-perl libhtml-tree-perl libhtml-format-perl

4. Run: sudo apache2ctl restart

5. Run: sudo -i

6. Run: useradd -m metadot

7. Run: passwd metadot

8. Enter password (metadot)

9. Run: chsh -s /bin/false metadot

10. Run: cd /home/metadot

11. Run: wget http://download.metadot.com/v6/Metadot6.4.5.4.tar.gz

12. Run: tar -zxvf Metadot6.4.5.4.tar.gz

13. Run: chown -R www-data.www-data metadot

14. Run: find . -type d -exec chmod 755 {} \;

15. Run: find . -type f -exec chmod 644 {} \;

16. Run: chmod -R o+w /home/metadot/metadot/sitedata

17. Run: chmod -R o+w /home/metadot/metadot/html

18. Run: chmod 640 /home/metadot/metadot/etc/metadot.conf

19. Run: exit

20. Run: sudo mysql -uroot -p mysql

21. Enter MySQL password

22. Run the following SQL commands:

INSERT INTO 'user' VALUES ('localhost','metadot',password('metadot'),'Y','Y','Y','Y','Y','Y','N','N','N','N','N','Y','Y','Y','N','N','N','N','N','N','N','N','N','N','N','N','N','N','','','','','0','0','0','0');
FLUSH PRIVILEGES;
CREATE DATABASE 'metadotdb';
use metadotdb;
SOURCE /home/metadot/metadot/default_data/sampledata.sql;
quit

INSERT INTO 'user' VALUES ('localhost','metadot',password('metadot'),'Y','Y','Y','Y','Y','Y','N','N','N','N','N','Y','Y','Y','N','N','N','N','N','N','N','N','N','N','N','N','N','N','','','','','0','0','0','0'); FLUSH PRIVILEGES; CREATE DATABASE 'metadotdb'; use metadotdb; SOURCE /home/metadot/metadot/default_data/sampledata.sql; quit

23. Run: sudo /etc/init.d/mysql restart

24. Run: sudo nano /home/metadot/metadot/etc/metadot.conf

25. Change “pass=changeme” to “pass=metadot”

26. CTRL+O, ENTER and CTRL+X to save and exit

27. Run: sudo nano /etc/apache2/sites-available/metadot

28. Use the following configuration:

<VirtualHost *:80>
 
	ServerAdmin webmaster@localhost
 
	DocumentRoot /home/metadot/metadot/html
 
	<Directory /home/metadot/metadot/html>
 
		DirectoryIndex index.html index.php
 
		Options Indexes FollowSymLinks MultiViews
 
		AllowOverride None
 
		Order allow,deny
 
		allow from all
 
	</Directory>
 
	ErrorLog /var/log/apache2/error.log
 
	# Possible values include: debug, info, notice, warn, error, crit,
 
	# alert, emerg.
 
	LogLevel warn
 
	CustomLog /var/log/apache2/access.log combined
 
	Alias /images/ /home/metadot/metadot/html/images/
 
	Alias /js/ /home/metadot/metadot/html/js/
 
	Alias /metadot/ /home/metadot/metadot/metadot/
 
	Alias /public/ /home/metadot/metadot/sitedata/public/
 
	Alias /skins/ /home/metadot/metadot/sitedata/skins/
 
	# mod_perl2 goodness
 
	PerlOptions +Parent
 
	PerlOptions -ParseHeaders
 
	PerlSwitches -Mlib=/home/metadot/metadot/metadot
 
	<Perl>
 
		use Cwd;
 
		chdir "/home/metadot/metadot/metadot/";
 
		1;
 
	</Perl>
 
	<Location /metadot>
 
		DirectoryIndex index.pl
 
		SetHandler speedycgi-script
 
		PerlHandler ModPerl::Registry
 
		Options +ExecCGI
 
	</Location>
 
</VirtualHost>

<VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/metadot/metadot/html <Directory /home/metadot/metadot/html> DirectoryIndex index.html index.php Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /images/ /home/metadot/metadot/html/images/ Alias /js/ /home/metadot/metadot/html/js/ Alias /metadot/ /home/metadot/metadot/metadot/ Alias /public/ /home/metadot/metadot/sitedata/public/ Alias /skins/ /home/metadot/metadot/sitedata/skins/ # mod_perl2 goodness PerlOptions +Parent PerlOptions -ParseHeaders PerlSwitches -Mlib=/home/metadot/metadot/metadot <Perl> use Cwd; chdir "/home/metadot/metadot/metadot/"; 1; </Perl> <Location /metadot> DirectoryIndex index.pl SetHandler speedycgi-script PerlHandler ModPerl::Registry Options +ExecCGI </Location> </VirtualHost>

29. Run: sudo a2dissite default

30. Run: sudo a2ensite metadot

31. Run: sudo apache2ctl restart

32. Test going to http://192.168.1.10 with a browser on another PC

 

Additional Resources

Download metadot user and admin guide (PDF)
Skin cookbook (DOC)

Filed Under: Computers Tagged With: metadot, ubuntu

Connect

  • Facebook
  • GitHub
  • RSS
  • Twitter
  • YouTube

Recent Posts

  • Extremely Useful Applications for Web Development and IT Tasks
  • Installing BookStack Wiki on cPanel Shared Hosting
  • Media (MIME) Type Reference List

Tags

automatic base64 benchmark cache counter css deflate email font gzip htaccess html image inarray increment inline images in_array javascript jquery link list magento mailto menu metadot mysql number obfuscation opencart operating system order php random redirect rewriterule slashes software timestamp ubuntu unix upgrade url windows windows 7 wordpress

Blogroll

  • CodeIgniter
  • Fusion Forward
  • jQuery
  • Nettuts+
  • Smashing Magazine

© 2022 WarpConduit Computing. All Rights Reserved.